Print Page | Close Window

Automatic College Bell using AT89S8252 & DS1307



Printed From: ProjectsQA
Category: Projects Forum
Forum Name: Electrical, Electronics & Communication Projects
Forum Discription: Projects on Microprocessor, Microcontroller, Embedded, Robotics, VLSI, VHDL, Mini Projects and many more
URL: http://projectsqa.com/forum_posts.asp?TID=191
Printed Date: 24-Jun-2017 at 9:27pm


Topic: Automatic College Bell using AT89S8252 & DS1307
Posted By: femi
Subject: Automatic College Bell using AT89S8252 & DS1307
Date Posted: 11-Jul-2011 at 2:21pm
pls my project is on design and construction of an automatic college bell using AT89S8252 & DS1307.Pls can u post me the circuit diagram and working principle.thanks.



Replies:
Posted By: Vrishub
Date Posted: 29-Jul-2011 at 11:39am
Automatic College Bell (AT89S8252 & DS1307) Project takes over the task of Ringing of the Bell in Colleges. It replaces the Manual Switching of the Bell in the College.

It has an Inbuilt Real Time Clock (DS1307) which track over the Real Time. When this time Equals to the Bell Ringing time, then the Relay for the Bell is switched On. The Bell Ringing time can be Edited at any Time, so that it can be used at Normal Class Timings as well as Exam Times. The Real Time Clock is displayed on four 7-segment display.

The Microcontroller AT89S8252 is used to control all the Functions, it get the time through the keypad and store it in its Memory. And when the Real time and Bell time get equal then the Bell is switched on for a predetermined time.



http://files.spogel.com/projectsqa/qa-00191--automatic_college_bell.rar - Download Automatic College Bell Project.rar


Posted By: siva
Date Posted: 29-Jul-2011 at 11:56am
Automatic Periodic School Bell using Dallas RTC and I2C:

Domain: Embedded Systems Design
Software: Embedded C, Keil, Proload
Microcontroller: AT89S8252
Power Supply: +5V, 500mA Regulated Power Supply +12V, 500mA Regulated Power Supply
Display: 16 X 2 LCD
RTC: DS 1307
Crystal: 12MHz for MCU, 32.768 KHz for RTC
Input: Switches

ABSTRACT
Manual operation of school bell / college bell creates lot of disturbances caused by human errors. If the bell operator forgets to ring the bell for a specific period, or delayed to ring the bell, it creates disturbances for entire the institution. All the classes on that day will be completely disturbed. This problem is more present if the bell operator is on leave. Automatic Periodic College Bell is the only solution to avoid all these problems.

The Project AT89S8252 Microcontroller Based Automatic Periodic College Bell with RTC DS1307 Interfacing is an interesting project which uses AT89S8252 microcontroller as its brain. This project is very useful in schools, colleges and educational / academic institutions for automation of periodic class bell. This bell rings only at preprogrammed timings. As the DS1307 Real Time Clock chip is used, entire the calendar can be programmed into the microcontroller. User can program the bell to ring the bell from morning to evening and not to ring in after school hours and on Sundays and Second Saturdays. Micro Switches is provided for entering the required timings. This switches made this project user friendly. 16X2 LCD display is provided to display the alarm times and current time. DS1307 is interfaced to the microcontroller for real timing performance. A 3V battery can be connected to DS1307 to avoid time disturbances caused by power failures.

AT89S8252 has inbuilt flash EPROM. Data stored remains in the memory even after power failure, as the memory ensures reading of the latest saved settings by the micro controller. It can retain data for more than ten years. This project uses regulated 5V, 500mA power supply. Unregulated 12V DC is used for relay. 7805 three terminal voltage regulator is used for voltage regulation. Bridge type full wave rectifier is used to rectify the ac out put of secondary of 230/12V step down transformer.



Posted By: ellow
Date Posted: 05-Oct-2011 at 6:05pm
wat is the specifications of the 7-segment display and D1.pls reply


Posted By: umesharakeri
Date Posted: 15-Mar-2016 at 1:10pm
Please provide me how to test this circuit of Automatic college bell using microcontroller. I have done the hardware. not able to test.
how to set the time using keypad,
Send me complete testing/using the circuit procedure pls.
regds,
umesh


Posted By: sdarts
Date Posted: 04-May-2016 at 8:19am
Sir can u please send me the original C code for this project.



Print Page | Close Window